transfer box removal

[lord lucan]

hi chaps can this be done in situ if so rough how to please

[Apache]

It wont be in situ if you remove it.

[BUSHWHACKER]

Drain transmission fluid.
Remove gear shift surround.
Remove four bolts and lift off transfer lever.
Disconnect front/rear driveshafts from T/case.
Remove bolts that attatch T/case to transmission.
Unplug sensors.
Pull back T/case from transmission.

When re-fitting, take care not to damage oil seal on input shaft.

[lord lucan]

Drain transmission fluid.
Remove gear shift surround.
Remove four bolts and lift off transfer lever.
Disconnect front/rear driveshafts from T/case.
Remove bolts that attatch T/case to transmission.
Unplug sensors.
Pull back T/case from transmission.

When re-fitting, take care not to damage oil seal on input shaft.

thanks for that,bushy is it the 4 bolts or about 8 around the case banjo shapped?

[lord lucan]

thanks for that,bushy is it the 4 bolts or about 8 around the case banjo shapped?

[BUSHWHACKER]

It's the part with the 8 bolts.
see pic.....(Ignore red arrow)

[lord lucan]

thanks very much

[Apache]

It's the part with the 8 bolts.
see pic.....(Ignore red arrow)