Brake Caliper Rebuild?

[corsetts]

I need to do the calipers on my car.

I have a spare set of calipers and as the repair kits are no longer available I'm wondering if anyone knows anywhere I could send my calipers to to be rebuilt? (KZN130 by the way)


Thanks in advance of any help

[Maverick]

Repair kits are still available. I rebuilt mine a couple of months back, and even replace two of the pistons that had warped slightly.

Found the reciept.

Brakes International, in Rochdale, Phome 01706 666 999.

The repair kit listed on their system for my truck didn't fit, so it's an idea to measure the piston diameter before you phone. Mine were 45mm, and the part number (that fitted) was BCK4522, I spoke to Jason throughout and he proved customer service still exists.

Hope this helps.

[NiftyNev]

Mine were 45mm, and the part number (that fitted) was BCK4522

Should be same kit for the KZN130 as they have the same calipers and rotors as latter LN130. You'll need two kits as the catalogue shows the kit does one caliper only.

Nev

[corsetts]

That's fantastically helpfull, many thanks guys.

I'll give them a call then and get a pair ordered

Thanks again,

Chris