Tweet
Originally posted by TonyN
This is how I removed the cone washers....
1st time...
2nd and after times, see Nev's post above.
1st time...
2nd and after times, see Nev's post above.
Neville
-
Never used a hammer that big but my first attempt at removing cone washers was not good.Destroyed some of them and new ones from Toyota were very expensive.Treat them very gently now.
Neville -
You don't need to go near the washers, tap with a BFH around the outside of the hub, between the wheel studs, and they pop right out (usually
)
4x4toys.co.uk - Keeping you on and off the road...Comment
Comment