Hello, i'm hoping to get a bike rack that i'll be able to attach to the back of the surf. I've seen these fellas: http://www.pendle-bike.co.uk/nulldet...20Wheel%20Rack and they are held in place by the spare wheels bolts.
Now according to this thread: http://www.hiluxsurf.co.uk/forums/sh...highlight=bike the guy had remove the spare wheel support heel. Now my question really is: is it OK to grind that bit off? I'm assuming it must be there for a purpose and I don't want to reduce the integrity of the spare wheel carrier so I thought i'd better check first.
Or might it be better to try and cut the mounting plate for the bike carrier. I mean you could cut the top of the plate off to make it into a V shape so that the plate fits around the support heel. But then your cutting the mounting plate which also might be a bad idea.
Does anyone have any suggestions?
thanks
Now according to this thread: http://www.hiluxsurf.co.uk/forums/sh...highlight=bike the guy had remove the spare wheel support heel. Now my question really is: is it OK to grind that bit off? I'm assuming it must be there for a purpose and I don't want to reduce the integrity of the spare wheel carrier so I thought i'd better check first.
Or might it be better to try and cut the mounting plate for the bike carrier. I mean you could cut the top of the plate off to make it into a V shape so that the plate fits around the support heel. But then your cutting the mounting plate which also might be a bad idea.
Does anyone have any suggestions?
thanks



We'll also have the dogs in the back so the carrier has to go on the spare wheel so the boot can be opened quickly in case of emergency toilet breaks or bouts of travel sickness 
Comment