Standard ride height?

[dee]

thinking mine might be drooping a bit

at the rear, errr, start again, think I've gone a bit saggy...

this is not working out,

had a look under the back of me truck this afternoon and with a full tank of fuel and virtually nothing in the boot there's only about 40mm between the bump stop and the cup, should it be more?

anyone tell me what the rear ride height on a standard 3.0 td should be?

[Jonny77]

thinking mine might be drooping a bit

at the rear, errr, start again, think I've gone a bit saggy...

this is not working out,

had a look under the back of me truck this afternoon and with a full tank of fuel and virtually nothing in the boot there's only about 40mm between the bump stop and the cup, should it be more?

anyone tell me what the rear ride height on a standard 3.0 td should be?

Measure from the top of the wheel rim to the underside of the arch, mine was ~300mm with a full tank before fitting RT +2" springs, now its 350mm so I guess i didnt have SAS, so 300mm is about right.
The front was 350mm and is now 395mm.

[dee]

well mine is 300mm on the NS, arch to rim and 297mm on the OS arch to rim with a full tank of fuel.... nowt to worry about I guess

[yoshie]

well mine is 300mm on the NS, arch to rim and 297mm on the OS arch to rim with a full tank of fuel.... nowt to worry about I guess

A Blue Star stuck to the screen would balance that up nicely for you

here you go.http://www.hiluxsurf.co.uk/forums/showthread.php?t=1140