Tweet
Well i found out what the rattling is. Its looser than a cheap whore on a saturday night. MOT is up in July so i need to order a pair & would like to make sure i order the right bits 
-
-
Last edited by BUSHWHACKER; 30 April 2007, 16:54. -
Lovely thanks
Do i need to get any geometry checked after fitting or is it just a case of bolting them up???Comment
-
Originally posted by NismoLovely thanks
Do i need to get any geometry checked after fitting or is it just a case of bolting them up???
Nope, just bolt them on and away ye go!
If the anti-rollbar has any up and down movement on the ends, adjust the top nuts on the link bars to take up any slack.Comment
-
Woohoo brilliant
Much appreciated Mr Bushwacker
Comment
-
The rough trax anti roll bar links are really cheap, mine started rusting within 3 months,
I recormend you paint the lower end cap bit with some thick black paintComment
-
Originally posted by truckarms
Will do mate thanks for the advice.
I rang milners as they had them listed for £18 but it was only for bushes & washers so bought the ones from roughtrax. £63 all in for the pair.
Need a cv boot as well (wish i hadn't started looking now lol) & after having a bit of a poke about underneath there seems to be quite a bit of play on the O/S driveshaft where it bolts to the box/diff i dunno what it is. The big bit in the middle. Is this normal or something else i need to fix
Last edited by Nismo; 30 April 2007, 18:04.Comment
Comment