If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think you will find that they are for putting through the shock end for a different type of mounting ie like the old cortina which went through the centre of the spring through a hole in the bottom wishbone then bolted to the bottom of the wishbone
ok so what is the sequence for the rubbers and washers, there is only 2 washers and two rubbers, but wot ever sequence they are put in there is no thread left to put the nut on.....????????
ok so what is the sequence for the rubbers and washers, there is only 2 washers and two rubbers, but wot ever sequence they are put in there is no thread left to put the nut on.....????????
Starting at the shock/ Washer - Rubber put through Bracket then Rubber - Washer - Nut
Comment