If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi , Just done the breather pipe on the rear diff , with no problems, went to do the front one , but without lifting th vehicle , I can not see it even , let alone change it,. any one with any advice on reaching this one .
Cheers
http://www.darksidesolutions.co.uk - Web Solutions
its in the front diff cover, to the right of the mount bracket, you should be able to see it with the bash plate removed, unless you have a underneath aircon rad, then it'll probably be a bugger to get to.
4x4toys.co.uk - Keeping you on and off the road...
its in the front diff cover, to the right of the mount bracket, you should be able to see it with the bash plate removed, unless you have a underneath aircon rad, then it'll probably be a bugger to get to.
underneath aircon rad ........... Bugger !
http://www.darksidesolutions.co.uk - Web Solutions
Only way to get at it really is through the driver's side wheelarch with a torch. Take off the wheel and you should eventually be able to see and get at it that way - remove the plate for getting the oil filter out too.
Comment