Hope this is the right place for this.....
Are there any radio amateurs out there who have fitted a 2m rig into a surf and can give me the easiest and quickest way to do the job.? I had a quick look under the bonnet for a handy hole in the firewall for the power leads then closed it again as I got a flashback to the nightmare I had doing the job on my mondeo!
2.4ssr-x with 2 batteries so it doesnt matter which side the leads run.
thanks in anticipation
rog
mm0fwg
Are there any radio amateurs out there who have fitted a 2m rig into a surf and can give me the easiest and quickest way to do the job.? I had a quick look under the bonnet for a handy hole in the firewall for the power leads then closed it again as I got a flashback to the nightmare I had doing the job on my mondeo!
2.4ssr-x with 2 batteries so it doesnt matter which side the leads run.
thanks in anticipation
rog
mm0fwg


, very many thanks, have located the grommet from the engine bay and I will be up behind the dash like a rat up a drainpipe shortly...back on air tomorrow!! Dont think the Station Manager will let me drill holes in the roof so it will need to be back to the magmount until I can get a mounting for the wheel carrier as that seems like a pretty good spot. Thanks again and 73
that if you are not allowed to drill holes in the roof then you will GAS THEM INSTEAD !!!
Her call
Comment