Alternator won't play the game !!

[Simon.O.]

O.k.......I have done the searches, done the reading, done the testing and it appears that the alternator is not playing the game properly !!
With the motor running I was only getting about 11.5 v at the batteries and not so long ago when I was doing other testing I was getting 13.1v minimum and up to 14v+
So now it is time for the Alternator to come out......that looks like fun.
I may pull it out upwards and bin the A/C pump while I'm there ( it does not do f-a anyway.
I'll try a new set of brushes first and see how we go.
Anyone know the Alternator Part # for a 2LT with the rear mounted vac pump.
Better still does anyone know the Part # for the brushes.
At the mo she is in the station car park on a charger so I can get home in the morning.

[Gamedawn]

Toyota don't seem to list the brushes as a seperate item but the alternator part number for my '90 2LTE is 27060-54110. This is equivalent to a Nippon part no A60801. When I needed brushes for mine I got them from a motor factor using the Nippon number.

[Simon.O.]

[QUOTE=Gamedawn] the alternator part number for my '90 2LTE QUOTE]
Thanks for the reply
I'll see how I go with those numbers

Does your alternator have the vacum pump at the rear,
Does anyone know if it make a difference whether the pump is rear or front mounted as far a brush p/n's go

[Gamedawn]

Oops. Mine has a front mounted vac pump. If you post up your vin plate info I can look it up for you.

[Simon.O.]

VIN 7A8H60G0794018260

On the manufacturers plate is
MODEL # LN130G-GKMGX
FRAME # LN130-0018260

Hope this may help, and thanks for your help.

[Gamedawn]

Ok. The alternator is 27020-54411 (model dates 08/89 to 08/90) and that translates to a Nippon A60796. There is even a part number for a brush, which is 27371-54412. Hope that helps

[sumo]

ok its my turn now.I fitted a 2nd hand alternator (thanks Jotto) after mine kind of sezed last weekend and although the metre says its charging the timing belt,filter,charging,and turbo lights dont go off as they should,I had to cut the plastic off of the plug as they were slightly different size casings but the connections all fit and went into the right slots.what am I doing wrong?????
Answers in words that an electical dummy can understand please.

Ta from a confused Sumo.