If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi there any one have any ideas what this might be my rear heater in my 1992 ssr-x ln130 only blows cold air no matter if the switch is in the hot position or the cold
cheers
mick
Two possibilities come to mind. First is that the lever isn't connected to the valve that opens the flow of water to the rear heater. Second is possibly a big air lock in the pipework to the rear heater matrix.
theres 2 pipes just below thermostat, take em both off and bung a hose pipe up it (with the heater in the hot position...) and plf. make sure the system is nt airlocked when you put it back together tho. good luck!
theres 2 pipes just below thermostat, take em both off and bung a hose pipe up it (with the heater in the hot position...) and plf. make sure the system is nt airlocked when you put it back together tho. good luck!
Comment