spot lights

[pops]

hi all.
got couple spot lights to fit on my baby 92. 2.4 ssr-g
can anyone point me to best place to connect to main beam.
as not got manual yet.
any clues to where and colour wire welcome, before i go out and tinker in the morning.

martin

[rich]

Here is the wiring diagram. I would recommend putting in a relay so you dont burn out the loom.

Rich.

http://www.afm15.dial.pipex.com/surf...orlighting.jpg

[pops]

Here is the wiring diagram. I would recommend putting in a relay so you dont burn out the loom.

Rich.

http://www.afm15.dial.pipex.com/surf...orlighting.jpg

YES GOT RELAY FOR THEM.

DIAGRAM NOT COMING UP

Martin

[rich]

Here is the wiring diagram. I would recommend putting in a relay so you dont burn out the loom.

Rich.

http://www.afm15.dial.pipex.com/surf...orlighting.jpg

Be patient it is 240Kb. If not drop me a PM and I will mail it to you.

[pops]

Be patient it is 240Kb. If not drop me a PM and I will mail it to you.

GOT IT NOW THANKS RICH.

Martin

[Guest]

hi all.
got couple spot lights to fit on my baby 92. 2.4 ssr-g
can anyone point me to best place to connect to main beam.
as not got manual yet.
any clues to where and colour wire welcome, before i go out and tinker in the morning.

martin

Martin.

Best place to connect to the main beam circuit is right behind the light unit on the drivers side - it's not that easy to get to as you need to move the battery back a little but and remove the windscreen washer resevoir. With a test lamp you can then test for which is the wire live with main beam - easier than reading the wiring diagrams.

Cheers

[pops]

spotlights

Martin.

Best place to connect to the main beam circuit is right behind the light unit on the drivers side - it's not that easy to get to as you need to move the battery back a little but and remove the windscreen washer resevoir. With a test lamp you can then test for which is the wire live with main beam - easier than reading the wiring diagrams.

Cheers

THANKS LUCKY JUST GOT TO THAT STAGE NOW.
but work calls today (boo)

martin

[pops]

THANKS LUCKY JUST GOT TO THAT STAGE NOW.
but work calls today (boo)

martin

thanks again lucky the spots are wired up now
martin

[Phil H]

thanks again lucky the spots are wired up now
martin

You did use a relay didn't you????

Phil

[pops]

You did use a relay didn't you????

Phil

o yes relay is in there.
thanks.
martin

[pops]

o yes relay is in there.
thanks.
martin

poxy lights not working now?
fuse ok.
checked all connections there sound.
how do i test/check relay?
should i take switch out of circuit as instructions say you you can
but means you cant switch them off if you dont need them on with main beam.

[Guest]

poxy lights not working now?
fuse ok.
checked all connections there sound.
how do i test/check relay?
should i take switch out of circuit as instructions say you you can
but means you cant switch them off if you dont need them on with main beam.

Martin.

You should be able to hear the relay click when you switch them on. If you don't hear a click then it ain't working. You will need to use a test lamp to check the live feed to the switch side (the one from the main beam cable) and also check the earth (connect test lead to a known live and touch the earth cable. Then check the live input to the power in side (the battery feed). and the earth. Then check on the output side again. By process of elimination you should be able to find where the problem is.

Cheers

[pops]

Martin.

You should be able to hear the relay click when you switch them on. If you don't hear a click then it ain't working. You will need to use a test lamp to check the live feed to the switch side (the one from the main beam cable) and also check the earth (connect test lead to a known live and touch the earth cable. Then check the live input to the power in side (the battery feed). and the earth. Then check on the output side again. By process of elimination you should be able to find where the problem is.

Cheers

thanks mate will check it out tomorrow.
bit dark now.

martin

[pops]

spotlight update

thanks mate will check it out tomorrow.
bit dark now.

martin

working again now
relay u/s
halfrauds changed it no charge.
should think so too.