yobit eobot.com

Announcement

Collapse
No announcement yet.

need to find where / what this is for

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need to find where / what this is for

    just got my surf but running poorly and bad fuel mpg (think that was down to the engine temp sensor not having the wiring put back when they renew the starter motor before i collected it
    the blue outlined area on the inlet manifold there is a black plasic valve
    my one is damaged and is there piping to it as its missing
    what is it for ?.

    plus i need to get the red outlined bits too if someone can help


  • #2
    i will check tomorrow if i got them red marked bits
    the wolf is always bigger when you are scared!!

    Comment


    • #3
      Maybe someone installed a port for a BOV on the manifold. Just block it off if not needed.

      Nev

      Comment


      • #4
        Originally posted by budweiser View Post
        i will check tomorrow if i got them red marked bits
        cool thanks

        the black valve i think goes down to the egr valve under the inlet

        Comment


        • #5
          Originally posted by Storm View Post
          cool thanks

          the black valve i think goes down to the egr valve under the inlet
          Oh, that valve. Now I know what you mean. There's two in that area. One is for EGR Valve and also the small butterfly. Works both to recirculate EGR gasses. The other is also for small butterfly but only operates at engine shutdowm. Both valves are required at shutdown to close the butterfly.

          Nev
          Last edited by NiftyNev; 2 July 2012, 21:22.

          Comment


          • #6
            got what you see on the pics,

            for the aircon is the angle what you are looking for? of the clips for the aircon hose (got four of those)?
            Attached Files
            the wolf is always bigger when you are scared!!

            Comment


            • #7
              Originally posted by budweiser View Post
              got what you see on the pics,

              for the aircon is the angle what you are looking for? of the clips for the aircon hose (got four of those)?

              yes both bits on the air con
              do you have the black valve ?

              Comment


              • #8
                Originally posted by NiftyNev View Post
                Oh, that valve. Now I know what you mean. There's two in that area. One is for EGR Valve and also the small butterfly. Works both to recirculate EGR gasses. The other is also for small butterfly but only operates at engine shutdowm. Both valves are required at shutdown to close the butterfly.

                Nev
                so the black valve goes to the brown valve to close butterfly ?.

                Comment


                • #9
                  Originally posted by Storm View Post
                  yes both bits on the air con
                  do you have the black valve ?
                  ok i had being looking and don't have the angle bit, or the black valve, but got the rest, let me know if you want to post it, to:
                  thejoke.acosta@gmail.com
                  the wolf is always bigger when you are scared!!

                  Comment


                  • #10
                    posted! nothing for the bits, 4.45 for postage
                    you will have them by mon./thue.
                    the wolf is always bigger when you are scared!!

                    Comment

                    Working...
                    X