yobit eobot.com

Announcement

Collapse
No announcement yet.

3.0 TD Kzn130 Removing aircon to make room for ATF cooler

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3.0 TD Kzn130 Removing aircon to make room for ATF cooler

    Has anyone removed the aircon junk to make room for a transmission oil cooler? I have read lots of posts regarding additional tranny oil cooling as my SSRX gets a little warm when towing our 4 berth caravan. After a scare last year with the ATF light coming on I have towed without OD on but the fuel consumption is scary like this. Any thoughts much appreciated


    Nick

  • #2
    Fit the cooler on the other side of the radiator, the AC condenser only takes up half the width.
    Do you know that, with a 50 character limit, it's

    Comment


    • #3
      Or fit it at the bottom so that it takes air from the underside of the bumper. That's where mine is.
      Mike G

      Comment


      • #4
        Thanks guys

        When you say at the bottom do you mean underneath the aircon rad or below bash plate as some seem to suggest?

        As I use it as a caravan tug and not off road I have thought of taking the bash plate off to let a bit more air circulate round the bottom end to help cooling.


        Any thoughts

        Comment


        • #5
          Originally posted by nicksalmons View Post
          Has anyone removed the aircon junk to make room for a transmission oil cooler? I have read lots of posts regarding additional tranny oil cooling as my SSRX gets a little warm when towing our 4 berth caravan. After a scare last year with the ATF light coming on I have towed without OD on but the fuel consumption is scary like this. Any thoughts much appreciated


          Nick
          is this what you mean -
          aircon binned - coolers in the bash plate with additional cooling fans.

          they keep the atf and engine oil at a steady temp in over 30 degree heat in traffic jams
          Attached Files

          Comment


          • #6
            Looks like the real deal

            Did you get that made up or was it off the shelf from somewhere?

            Comment


            • #7
              Originally posted by nicksalmons View Post
              Did you get that made up or was it off the shelf from somewhere?
              made it myself - its a fairly simple thing to make for anyone that does a bit of fabricating.

              theres more pictures on the lexurf v thread - start at the last post and work back

              Comment

              Working...
              X