If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yes easy if all goes to plan. You need a 12mm deep socket. Disconnect negative battery terminals. Remove glow plug rail from manifold and top of glow plugs and note the insulators, wiring, nut and washer will need to be replaced in the correct order.
Remove glow plugs carefully and if any resistance is felt, there may be a carbon build up on them, so try not to bend them during removal and just keep rotating gently until they come out.
Install the new ones, replace the glow plug rail then reconnect battery terminals.
Yes easy if all goes to plan. You need a 12mm deep socket. Disconnect negative battery terminals. Remove glow plug rail from manifold and top of glow plugs and note the insulators, wiring, nut and washer will need to be replaced in the correct order.
Remove glow plugs carefully and if any resistance is felt, there may be a carbon build up on them, so try not to bend them during removal and just keep rotating gently until they come out.
Install the new ones, replace the glow plug rail then reconnect battery terminals.
Comment