Engine Cutting out in reverse

[Danno]

Hi All, Long time no speak

Its time to get the flamin' truck fixed.

2nd Gen 3.0

When its been running for a while, I can select reverse no problem, but as soon as I give it any throttle it "miss fires" or momentarily cuts out repeatidly. So much so it normally stalls. On the flat it will roll back with no problem but any gas and its spluttering again. I'm thinking its electrical.

Any ideas?

I'm getting a little fed up with having toyota garden ornaments again.

Cheers

Dan

[charvell]

when was the last time you changed the ATF?

[sledge]

thought you had sorted all the prob's with it

[Danno]

No. I havent touched it in months. Been sat collecting spider webs.

I've removed the immobiliser ans so sorted the intermittant ignition cut out problem, but still got the reverse one.

Never changed the ATF. If its ok in forward cant see why it would do it in reverse.

[charvell]

still worth checking and changing, its a cheep fix if it solves the problem

[Danno]

I'll do it as matter of course anyway

Could it be the kick down cable?

Or does the gbox bring the revs up when reverse is engaged?

[RodLeach]

I'd just like to say.. i haven't a clue!





BUT... Just dont use reverse! sorted!

[surfenstein]

Hi All, Long time no speak

Its time to get the flamin' truck fixed.

2nd Gen 3.0

When its been running for a while, I can select reverse no problem, but as soon as I give it any throttle it "miss fires" or momentarily cuts out repeatidly. So much so it normally stalls. On the flat it will roll back with no problem but any gas and its spluttering again. I'm thinking its electrical.

Any ideas?

I'm getting a little fed up with having toyota garden ornaments again.

Cheers

Dan

try changing the g/box ecu.

[Danno]

Thats the next one on the list

Stormy, any luck on that ecu?

[stormforce]

PM sent Dan

[Danno]

Right..........Where is the flamin' gbox ecu? Need to get mine out.

[stormforce]

i took the wrong part out Dan but have a look here
http://www.toyodiy.com/parts/p_J_199...KPQT_8410.html

[Danno]

So no little black box then?

Maybe have to change all the solenoids etc. too.

[Vagrant No2]

Hi Danno , long time no talky . If you need an ECU repair I have been recommended a specialist company who has done a few Surf ECU's before with no problem. I think they charge £70 for complete overhaul with warranty. Let me know if you want their details and I will get them for you.

[Danno]

Cheers Rick, will bear that in mind.

On another topic. What type of battery (072 etc) do surf's have?