Front End

[GIRDLES]

Hi All

Just replaced the rear springs for milners 20% stronger. The rear now sits at 13 inches from top of rim to the arch, the front measures 10.5 inches from top of rim to arch,can any adjustments be made to level the ride or do I require new prings on the front also?

This is a 1996 3rd gen

Cheers

[Hawaii]

evenin' girdles

I had exactly the same thing when I put in the milners 20% uprated (but no longer) springs on the back of my 3rd gen.

Although it sits dead level when I'm towing the caravan, without it, the front was appox 1 1/2 inches nose down.

I put on a set of the milnes front springs , again 20% uprated and she now sits level when not towing or about 3/4 inch tail down when I am. No difference in the ride quality either.

Fronts are a bit harder to change as you have to remove the entire strut but I paid a local spanner man (with air tools etc.) £20.00 and he did the job in less than an hour.

hope this helps.

ta

hawaii