EGR Blank Plates, where can i buy some?

[shrewiside]

Hi guys

after much deliberation, i think the general consensus is to do away with the egr function, and i think the same folk believe the best way to achieve this is to use proper blank plates on the hard pipe rather than prevent the valve operation bia a vasectomy of the vac pipes!

if this is the case, (feel free to add your two penneth!) where can i buy some decent blank plates for a 3.0 kzn 130 please?

cheers

shrew

[stormforce]

scroll to the bottom of this page and look at the links for animal

[davemaxx]

my two penneth,
the blank plates are really good because on some motors the egr can be so cloged up with carbon and gunge it can be jamed open rather than closed,
then the bloking the vacume vane trick won't do anything anyway.
i had this problem on a diferent motor and the affects on poor running are horrendouse, and feels like could it be a --

bloked fuel filter
or a bloked air filter
or dodgy fuel pump
or bust turbo
spluttering to pull ect
not even a fault code

it would have been nice to buy a prefabed one but i sandwiched a piece of beer can metal between the egr flange and the manifold (10 minute job)

[shrewiside]

thanks for that,

i suppose because i can't get hold of animal i'll have to crack open a tinny then?

nightmare that!!!!!!

cheers

shrew