3.0 T/D Auto NOW BREAKING

[Artful_dodger]

Hi,
I`m looking for a N/Side front driveshaft (cv axle). Also the speedo sender unit which is just to the right where the rear prop. goes into gearbox.
cheers,
chris

Hi There

You need to contact Tony N as the body and all the running gear is now at his place.
Although i do still have quite a few bits left here

Cheers
Paul

[b19aus]

The tail pipe can be yours for £15 + P&P unless you want to collect

Cheers
Paul

Not wanting 2 muck u about but usual source near me won't be able to confirm what he can get me on the list until Mon/Tues, so won't be able to say either way until

[Artful_dodger]

Not wanting 2 muck u about but usual source near me won't be able to confirm what he can get me on the list until Mon/Tues, so won't be able to say either way until

No problem
cheers
Paul

[djcazyp]

Any chance you have the plastic handle which screws onto the drivers seat adjustment lever at the side of the seat?

[Artful_dodger]

Any chance you have the plastic handle which screws onto the drivers seat adjustment lever at the side of the seat?

Hi djcazyp

I do still have the seat adjuster handle.

Send me some postal details and i'll pop it in the post

Cheers
Paul

paul.kearse@ntlworld.com OR Tel 07930379698

[djcazyp]

Wow, finally found one!
You have email!
Many thanks

[Artful_dodger]

Hi Caz

If you haven't already received the plastic seat adjustment handle it should be there with your Monday morning post.

Cheers
Paul

[firefly]

Hi do you have the electric aerial (does it work) as mine has just packed up!!!

[Artful_dodger]

Hi do you have the electric aerial (does it work) as mine has just packed up!!!

Sorry the aerial was knackered B4 i bought the surf.
If yours still has the mast i'll buy it from you as some little scrote decided to try and remove mine.

Cheers
Paul

[firefly]

Cheers will see what i can do,dont know if i can get another aerial for it i was told the Mr2 one fits so i am going to remove it and scour the srappers, if it does i will sort out the mast for you....

[stormforce]

Cheers will see what i can do,dont know if i can get another aerial for it i was told the Mr2 one fits so i am going to remove it and scour the srappers, if it does i will sort out the mast for you....

Dave roughtrax do a small rubber ariel to fit the surf's wing.You may need to use the bit of the surfs ariel that sits on the outer side of the wing tho so the ariel sits correct on the wing.

[Artful_dodger]

Cheers will see what i can do,dont know if i can get another aerial for it i was told the Mr2 one fits so i am going to remove it and scour the srappers, if it does i will sort out the mast for you....

Thanks Firefly that'd be great

Also thanks to Stormforce for the info. I want to try and keep to the original if poss, have used "rubber ducks" in the past and found that unless they're up on the roof,the reception is not too good.

Cheers
Paul

[djcazyp]

Can I just say a MASSIVE thankyou for sending me the handle!
TOP BLOKE!

[30Surfer]

Have you decided to split the engine...if so, have you still got the head and how much..???

[Artful_dodger]

Have you decided to split the engine...if so, have you still got the head and how much..???

Hi 30Surfer

Sorry, the engine was sold as a complete unit

Caz,,,,you're welcome

Cheers
Paul