Turbo oil feed return pipe leak

[michael sa]

Thanks a bunch, I've been a bit lazy (in watching you be a guinea pig to see how you got on with it, ) so I appreciate that you've taken the time to report back here with the outcome.
Thanks for the photos. I reckon I'll have a go.
Was there much 'gunk' up inside the oil return pipe or was it clean?
Also, any chance of putting up the part numbers involved?
I know the lower gasket is: 15472-67010 (been there done that...)

[andycook]

found the leak point, it was split on the inside of bend on the big pipe, 1/2 way along it

pipe clean i think, will take another look

stormforce posted some of the part nos, but i have them all on invoice
so will post them up later

vehicle back together now, fiddly lining the exhaust back up with holes
and that metal support stay that fits on gear box was a hassle to undo and tighten the top bolt, but couldnt remove downpipe without loosening the stay off

[michael sa]

The part numbers for the gaskets from Toyota if anyone ever needs to do their turbo at all are as follows

Turbo to Manifold Gasket -- 17278 - 67010 and £6.23 +vat

Oil Feed and Return Gaskets

Return Pipe Gasket -- 15472 - 67010 and £1.42 + vat
Feed Pipe Gasket -- 15471 - 58010 and £1.52 + vat

Banjo Gaskets -- 90904 - 30004 and £7.02 + vat

OK found them,

15407-67010 : Pipe sub-assy, Turbo oil inlet
15427-67010 : Gasket, Turbo oil outlet No 1
15471-58010 : Gasket, Turbo oil inlet
90904-30004 : Gasket (for turbo oil inlet pipe)

[andycook]

yup thats them
and the support stay part no is: 17293-67010

[michael sa]

Cheers Andy, I'll put up some photos too when I do mine - and you know how much I'm looking forward to it... so don't hold ya breath!