nightmare

[dyte]

driving along fine today and then went to brake slowly the pedal creeped to the floor so i stoped and gave a while too let things cool down and still have same problem seems to pump fine but when kept under pressure will creep to the floor so i went on to check the normal stuff and couldnt find any leaks all pipes fine fuild level remains the same so am i correct in thinking master cylinder and if soo where will i find one i have checked milners and roughtrax they dont list them on there web page has anyone any idea and how much they cost

[surfenstein]

yea I would definately say its your master cylinder.i think they are the same as the 4runner,so try checking the listings for one.

[surfdude.]

[Ricksurf]

99.9% sure youre master cylinder seals shot and allowing fluid to creep past thus not holding pedal pressure

[Gamedawn]

It could be worth changing the fluid first. Water contamination can give similar symptoms and old fluid is hygroscopic

[BUSHWHACKER]

You got those wheels and tyres I was bidding on!!

[dyte]

went out today and chANGED the brake fuild and blead the whole system starting at the compensator done this twice just to make sure all the air had gone got a reaaly good pedal then it started to creep again so after phoning milners roughtrax and a few other online shops they all told me that this is a main dealer part only so phone yota up in dundee and they quoted £204+vat for a new one or £71+vat for repare kit sod that took a risk and bought on from ebay