fitting spots

[RAPTOR]

Not Long had a Surf (3 weeks) and have purchased a front bar for it and a damn nice pair of spots, i will just about manage fitting the bar but the spots i will be clueless at, is it best to get an auto electrician or try it myself with a bit of advice of here or is there anybody in the surrounding Warrington area would come down and show/charge me....the last thing i want to do is smoke the engine or worse frying myself

Ta

[BUSHWHACKER]

Type 'spotlight fitting' into the search box.

[RAPTOR]

Sounds to complicated, foreign, and dangerous to me, i have only mastered a plug a year ago so looks like i will have to get an autospark to do it instead of a really bad job by myself

[BUSHWHACKER]

Sounds to complicated, foreign, and dangerous to me, i have only mastered a plug a year ago so looks like i will have to get an autospark to do it instead of a really bad job by myself

If you look in Halfords, they do a spotlight wiring kit for about £12 it includes the relays and some wire and most of the 'thinking' is done for you. All you have to do is mount the lights, fit a switch and join all the wires together.

[RAPTOR]

thanks for the advice BW, i will try Halfrauds tomorow, if you do not hear from me again i will be in The Warrington Burns unit for a while, so please send all get well cards,grapes, skingraffs ect to there.

[internetsurfer]

i fitted my spots and followed the wiring diagram vince supplied, i took the feed from the headlight green with red stripe. all works well except when i release main beam to go back to headlights the spots stay on. i have to turn my lights off fully to get them to turn off. ANY IDEAS ???

PS - i didnt run a switch into the cab