yobit eobot.com

Announcement

Collapse
No announcement yet.

4WD indicator not working.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4WD indicator not working.

    Since having my clutch replaced, the green 4wd indicators have stopped working on the dashboard although 4wd does seem to be engaging as I can hear it clicking in when I press the switch on the gear stick. Have checked the bulbs and they are working so could a wire have been disconnected when the clutch was fitted at the gearstick end?
    Would take it back to the garage but it's a lot of hassle if it's something I could easily do myself.
    Any advice would be much appreciated.

  • #2
    Originally posted by ant
    Since having my clutch replaced, the green 4wd indicators have stopped working on the dashboard although 4wd does seem to be engaging as I can hear it clicking in when I press the switch on the gear stick. Have checked the bulbs and they are working so could a wire have been disconnected when the clutch was fitted at the gearstick end?
    Would take it back to the garage but it's a lot of hassle if it's something I could easily do myself.
    Any advice would be much appreciated.
    check the vacuum pipes under left hand side of engine bay first then all the conections underneath mine did the same was one of these good luck but mine was a 3ltr dont know if the lay out is diferant or not?
    Last edited by mrsurf; 16 September 2006, 18:58.

    Comment


    • #3
      Thanks I'll check the pipes and let you know how I get on.

      Comment

      Working...
      X