yobit eobot.com

Announcement

Collapse
No announcement yet.

wheel bearings & bronze bushes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wheel bearings & bronze bushes

    Hi, I'm going to order some front wheel bearings from Milners and I wondered if it was worth fitting new bronze bushes for the hubs at the same time (in an attempt to stop the rattle mentioned in these pages from time to time). I'm not fitting them myself, I'm just getting the parts, can anyone point me to the part no. from Milners for the above plus any other parts that are required / worth doing at the same time perhaps?

    Thanks in advance.

  • #2
    Originally posted by iggypop
    Hi, I'm going to order some front wheel bearings from Milners and I wondered if it was worth fitting new bronze bushes for the hubs at the same time (in an attempt to stop the rattle mentioned in these pages from time to time). I'm not fitting them myself, I'm just getting the parts, can anyone point me to the part no. from Milners for the above plus any other parts that are required / worth doing at the same time perhaps?

    Thanks in advance.
    Hi Iggy i think a few people have said they don't go much on milners bearings as they are cheap and never lasted long at all and now they just gets them from roughtrax.I've never had to do them so i wouldn't know myself but just what i have read on here
    https://www.facebook.com/groups/henpals/

    Comment


    • #3
      Aah right, that's handy to know. I'll have a look at Roughtrax then. I take it they are online, I'll do a Google search.

      Thanks for the tip.

      Anyone got any advice on the bushes then?

      Comment


      • #4
        Originally posted by iggypop
        Aah right, that's handy to know. I'll have a look at Roughtrax then. I take it they are online, I'll do a Google search.

        Thanks for the tip.

        Anyone got any advice on the bushes then?
        http://www.toyotahilux.com/ here you go
        https://www.facebook.com/groups/henpals/

        Comment


        • #5
          Thanks for that, I'll get my wallet out now I suppose.

          Cheers

          Comment

          Working...
          X