Cylinder heads from "japanese4x4parts"

[Bjwl93]

Any feedback from that head? I need one for mine and not sure if to contact them or spend out at roughtrax..

[Jon Tallis]

Cannot speak for this supplier but just about 1 year ago I bought a cylinder head from a supplier on e_bay and it has been great. I got a complete head all made up with valves,cams ,bolts,injectors and gasket set from M. peer
108 fishponds road
london
London
SW177LF
United Kingdom



Phone:07861249001
Fax:02085424537
Email:makpeer@yahoo.com


At the same time I replaced radiator,water pump and thermostat,also checked out my viscous fan coupling just to be sure none of these had caused the original head failure. All I can say is after a year of driving in temperatures between a low of minus 20 and a high of plus 40 centigrade (I live in Bulgaria) I am more than pleased with this head. Using the built up head saves a shed load of time transferring and setting valves etc., also to be extra sure I used a Blueprint head gasket.

That's great Tom, Thanks for your help - I'll give him a try

[tomtemp]

Cannot speak for this supplier but just about 1 year ago I bought a cylinder head from a supplier on e_bay and it has been great. I got a complete head all made up with valves,cams ,bolts,injectors and gasket set from M. peer
108 fishponds road
london
London
SW177LF
United Kingdom



Phone:07861249001
Fax:02085424537
Email:makpeer@yahoo.com


At the same time I replaced radiator,water pump and thermostat,also checked out my viscous fan coupling just to be sure none of these had caused the original head failure. All I can say is after a year of driving in temperatures between a low of minus 20 and a high of plus 40 centigrade (I live in Bulgaria) I am more than pleased with this head. Using the built up head saves a shed load of time transferring and setting valves etc., also to be extra sure I used a Blueprint head gasket.

[Jon Tallis]

Very attractive price - has anyone got first hand experience (positive or negative), of these?
No hearsay etc please - only first hand experience
http://www.japanese4x4parts.co.uk/to...-up-9063-p.asp