yobit eobot.com

Announcement

Collapse
No announcement yet.

Cylinder heads from "japanese4x4parts"

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Cylinder heads from "japanese4x4parts"

    Very attractive price - has anyone got first hand experience (positive or negative), of these?
    No hearsay etc please - only first hand experience
    http://www.japanese4x4parts.co.uk/to...-up-9063-p.asp
    Tags: None
  • #2
    Cannot speak for this supplier but just about 1 year ago I bought a cylinder head from a supplier on e_bay and it has been great. I got a complete head all made up with valves,cams ,bolts,injectors and gasket set from M. peer
    108 fishponds road
    london
    London
    SW177LF
    United Kingdom



    Phone:07861249001
    Fax:02085424537
    Email:makpeer@yahoo.com


    At the same time I replaced radiator,water pump and thermostat,also checked out my viscous fan coupling just to be sure none of these had caused the original head failure. All I can say is after a year of driving in temperatures between a low of minus 20 and a high of plus 40 centigrade (I live in Bulgaria) I am more than pleased with this head. Using the built up head saves a shed load of time transferring and setting valves etc., also to be extra sure I used a Blueprint head gasket.

    Comment

    • #3
      Originally posted by tomtemp View Post
      Cannot speak for this supplier but just about 1 year ago I bought a cylinder head from a supplier on e_bay and it has been great. I got a complete head all made up with valves,cams ,bolts,injectors and gasket set from M. peer
      108 fishponds road
      london
      London
      SW177LF
      United Kingdom



      Phone:07861249001
      Fax:02085424537
      Email:makpeer@yahoo.com


      At the same time I replaced radiator,water pump and thermostat,also checked out my viscous fan coupling just to be sure none of these had caused the original head failure. All I can say is after a year of driving in temperatures between a low of minus 20 and a high of plus 40 centigrade (I live in Bulgaria) I am more than pleased with this head. Using the built up head saves a shed load of time transferring and setting valves etc., also to be extra sure I used a Blueprint head gasket.
      That's great Tom, Thanks for your help - I'll give him a try

      Comment

      • #4
        Any feedback from that head? I need one for mine and not sure if to contact them or spend out at roughtrax..

        Comment

        Previous template Next
        Working...
        X