yobit eobot.com

Announcement

Collapse
No announcement yet.

glow plugs ???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • glow plugs ???

    how you test one

  • #2
    just disconnect the common + strap from the top of all plugs then use a test lamp conncted to the + terminal of the battery and the top of each plug - one at a time. If the lamp lights up, the plug is good. you could also use a multi-meter to check for continuity between the + terminal of the plug and the cylinder head - once again continuity means that the plug is good

    Comment


    • #3
      take it out and connect it to a battery ........... If you suspect them change them , make sure that you put them back together correctly with the insulator in the correct position , or you will blow the 80 amp fuse


      also make sure you can hear the relay clicking when you turn the ignition on
      ' You've arrived on a rather special night. It's one of the master's affairs.'

      Comment


      • #4
        Now here's the proper way to test. Remove them all and test continuity with a multimeter. Resistance should be less than 1 ohm.

        Nev

        Comment


        • #5
          cheers guys for replies, all sweet

          Comment

          Working...
          X