yobit eobot.com

Announcement

Collapse
No announcement yet.

heater stopped working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • heater stopped working

    My heater in the 2.4td LNZ surf has stopped working. The heater switch does not go to setting 1 , but only stays in settings 2 and 3. It does not turn the heater on at all at any setting. I have also noticed that the airconditioning light does not come on any more when heater switch in any position.
    I suspect its the switch is knackered ( melted ?) rather than the heater itself.
    Any suggestions please. Its freezing without the heat!
    Thanks

  • #2
    Is the fan blowing at all, if so does it change speed?

    Can you change the temp of the air coming out of the vents?
    My other cars a QUAD
    (sv1000spilot on surf forums)
    http://www.devonandcornwall4x4response.co.uk/index

    Comment


    • #3
      I have got a spare heater control switch here i'll do for £20 delivered if you want it
      https://www.facebook.com/groups/henpals/

      Comment


      • #4
        Hi,
        The fan is not blowing at all. When engine is warm/normal, there is slight heat coming from vents when the temp slide is set to hot (red colour).

        Comment


        • #5
          Fan motor might be fubard or dash control switch dead.

          Mines just done the same, i have cut into the wires to the fan motor, run a 12v feed with on off switch. Now have blower either off or on full but better than nothing.

          Can post pics if required.
          My other cars a QUAD
          (sv1000spilot on surf forums)
          http://www.devonandcornwall4x4response.co.uk/index

          Comment

          Working...
          X