is this a tester or wat heeeeeeeeeeeeeeeeeeeeeeeeeeeel p
Announcement
Collapse
No announcement yet.
she wont start
Collapse
X
-
Originally posted by steveo44 View Postis this a tester or wat heeeeeeeeeeeeeeeeeeeeeeeeeeeel pwww.overfab.uk
Comment
-
Originally posted by steveo44 View Posti was getting black smoke ive double checked everything is tight i was thiking of dragging her round block but i dont think this would help just clucthing at straws nowwww.overfab.uk
Comment
-
After taking a head off, I have had trouble getting the compression to come back up occasionally although not on a Surf. Have you got the valve clearances set right? Could you have timed it 180 degrees out, this is an easy mistake. Check the valve positions when the fuel squirts to No.1 cylinder and that the valves on no.4 are rocking. It could be that no.1 is rocking. This will stop it starting. If it will run on easy start, but not on diesel this is likely to be the cause.
If you were getting black smoke before the job was started, have you had the pump and injectors checked?
Can't think of anything else, I'll keep thinking about it.
Comment
Comment