she wont start

[steveo44]

ive had head rebuilt new glowplugs,new glowplug recister,new valvle pump,ecu fitted still wont start help please heeeeeelp heads going legs chopped off dying cant afford much moreps 2.4tdi 2l-te/surf on93 plate

[speedymacfish]

i Take it all the leads are connected...? You may think its silly but it could be as simple as a lead hiding under there in the shadows...!! I'm assuming you've bled the fuel through....?

[steveo44]

i Take it all the leads are connected...? You may think its silly but it could be as simple as a lead hiding under there in the shadows...!! I'm assuming you've bled the fuel through....?

all leads are connected doing my head in mate cheked round for lose wires none insight

[Sancho]

all leads are connected doing my head in mate cheked round for lose wires none insight

And you've primed the fuel pump?

When you say not starting, does it turn over and not fire, does it try to turn and stick or does it just do nothing?

[steveo44]

And you've primed the fuel pump?

When you say not starting, does it turn over and not fire, does it try to turn and stick or does it just do nothing?

primed the fuel pump ,tries to turn over but dosent

[Sancho]

primed the fuel pump ,tries to turn over but dosent

Have you checked there's fuel coming through the injectors?

[steveo44]

primed fuel pump turning over but won,t start

[steveo44]

fuel coming through top of injecters mate

[speedymacfish]

long shot...but take a look at the main fuse under the bonnet on the left hand side...... I know i've been there!!

[steveo44]

long shot...but take a look at the main fuse under the bonnet on the left hand side...... I know i've been there!!

cheked all fuses even the 80amp ones it wanta to but wont if you now wat imean

[speedymacfish]

if you've got fuel then it has to be electrical..... my thoughts are maybe your plugs are not heating up......??

[steveo44]

tested glow plugs coming on 4 eight secs glowing this is why my heads banging

[surfenstein]

have you re-checked the pump timing,it is possible to get the pump one tooth out when tensioning the belt.

[steveo44]

speedy this is why i went out bought plugs aglow plug recister pump valve even a ecu had plugs tested ok pump valve workig timing spot on ive done everything i know now

[speedymacfish]

so let me get this right so i can have a think...
You turn the key.... the engine turns over and keeps turning over but will not start...? And there is fuel coming out of the injectors when you crack the bolts open..?