hi guys..gals...not had me surf 2.4 long..evry thing fine except yesterday when in full lock going right i heard some kind on clanging noise...so when in tescos car park i gave it a good test and was some kinda loud creak when on full lock and braking sharp...took it back to dealer who reckons it is in the hub?personally i dont think so,but aint no mechanic so does anybody have any ideas mayb...under warranty so no cost to me..thx for any info..reefer.
Announcement
Collapse
No announcement yet.
noise on full lock
Collapse
X
-
Just apply plenty of grease to the steering stops!
http://www.yotasurf-online.co.uk/pub...oise+full+lock
Regards
Sam
Comment
-
Originally posted by ElvzThe steering stops only make a noise when you turn the wheel and smack the two parts together. Creaking sounds are the torsion bars. If you're all that fussy you can put spray grease on them to stop the noises.
Comment
-
Originally posted by Jimmuswell i was just about to ask what that dam creeking noise is......
now there's no need but im sure i have other questions to ask like
where can i get a backbox for a 92 2.4 surf????
Rear Exhaust Tail Pipe........1990 - 1995........ 005139......£115.00[font=Times New Roman][size=3]
[size=5][/size]
[/size][/font][font=Times New Roman][size=3][b][i][color=blue]I[/color][color=royalblue]a[/color][color=deepskyblue]n[/color] [color=blue]トヨタの[/color][color=royalblue]波92 のssr[/color][color=deepskyblue][color=royalblue]-g[/color] 擁護者[/color][/i][/b][/size][/font]
Comment
-
Here here!
Originally posted by speedymacfishThe boys are right once again, just stick a blob of greese on both sides, mine was doing the same only a day ago. read about it on here and added the greese... wayhay no more nasty gut renching loud noises!!
GFingers crossed nothing else goes wrong... Alex
Comment
-
thanks for the tip,but......
Mines creaking as of today thanks for the info,but.... the last couple of weeks the back window has been sticking about 3 inches from the top,is it a worn motor,dodgy solenoid or what? any advice happily recieved.
Comment
-
Originally posted by greenmanMines creaking as of today thanks for the info,but.... the last couple of weeks the back window has been sticking about 3 inches from the top,is it a worn motor,dodgy solenoid or what? any advice happily recieved.
Drop down tail gate, remove centre panel from tail gate, flick across both catches on either side of tail gate. This will enable you to operate the window while the tail gate is open **Warning do not operate the window without supporting it, it will come all the way out and fall out, its quite a weight so make sure its supported all the time**
Clean out the window runners and use a silicone spray in them to lubricate them.Say not always what you know, but always know what you say.
My 4x4
My choice
Back off
Comment
Comment