Hi All
Had my surf holed up in the car port for 18 months and have finally got round to rebuilding the head.
I have fitted a new head from stevo, and rebuilt most of the engine bay.
HOWEVER.... i need some info, 1 i have 2 heat shields from the turbo area, where do they go (piccy bracket 1 and 2)??
I have reconnected the glow plug wiring as per a posting i have seen on site, does this look right before i connect up the batteries?
(piccy provided)
finally i have 2 wires with ring connectors, i have a mounting on the bottom of the inlet manifold with a plastic isolator, i have put the wire with the large diameter holed ring connector onto the plastic spacer , the second wire with the smaller diameter hole i have placed on the top where the nut screws onto ie earth.
again is this right, i have put another piccy on the link for this.
http://aolpictures.aol.co.uk/ap/myAl...162643284686.1
Had my surf holed up in the car port for 18 months and have finally got round to rebuilding the head.
I have fitted a new head from stevo, and rebuilt most of the engine bay.
HOWEVER.... i need some info, 1 i have 2 heat shields from the turbo area, where do they go (piccy bracket 1 and 2)??
I have reconnected the glow plug wiring as per a posting i have seen on site, does this look right before i connect up the batteries?
(piccy provided)
finally i have 2 wires with ring connectors, i have a mounting on the bottom of the inlet manifold with a plastic isolator, i have put the wire with the large diameter holed ring connector onto the plastic spacer , the second wire with the smaller diameter hole i have placed on the top where the nut screws onto ie earth.
again is this right, i have put another piccy on the link for this.
http://aolpictures.aol.co.uk/ap/myAl...162643284686.1
Comment