Diagram for glow plugs????

[Manda073]

Hi All

Does anyone have or know of a diagram for the glow plugs, as to where they are supposed to hook up to? My 2.4 DT SSRX's plugs were not actually hooked up when I bought him, and now it is a little colder, he doesn't want to start first thing in the morning. He has just had new radiator, new cylinder head, new turbo tube, any ideas, anyone????

Many thanks, look forward to your replies,

Amanda

[plumb bob]

Found this, but will continue to look and get back to you.


http://www.toyotasurf.asn.au/techsite/glowplugs.htm


Also this;

http://www.toyotasurf.asn.au/techsite/fuses.htm

[Manda073]

Hi, Thanks, that's great, would you know where the wires go to from the glow plugs? Got the boys working on it now, but to no avail!!

[plumb bob]

Just been looking for a wiring diagram, but can't find one, Matt F will have one somewhere, I'll kook in my haynes manual and get back to you.

[plumb bob]

Ok, found this in the tech elec section, also do a search on the forum for glowplug electrics and see what comes up;


http://www.afm15.dial.pipex.com/surf...torpreheat.jpg

Hope this helps,

Robert

[Manda073]

Thanks for thatm you're a diamond. Hope it works, we seem to have a spare few wires going no-where!! Ah well, see if it blows up in the morning!!

[plumb bob]

Thanks for thatm you're a diamond. Hope it works, we seem to have a spare few wires going no-where!! Ah well, see if it blows up in the morning!!

If all that was disconnected when you bought it, it sounds like it's had a new engine, or engine out, or did someone start to take it apart for the head change??

[Gazbo]

I changed my plugs the other week and from what i can remember, there is a single spade connector wire that goes onto the main element and a thick wire that is held on by a nut, 12mm i think?