4x4 selection problem!!!!!!!!@ jotto?

[tonka1]

Well after months now the 4x4 selection problem needed sorting. seems that even the gentle clouts with a hammer wont free the motor to engage the actuator and it needs to be replaced!!!!!!!!!!! however the part appears not to have an overhaul kit avalible and to replace the unit costs £500++++ and needs to come from japan.(second hand one I think)
So after a quick call to Jon(jotto) and great difficulty explaining which part i was after from his breaker some pic's were requested,(toyota print and the thing itself) hope these make it a bit clearer. the plate with the 4x 10mm bolts and no wire will come off to show 2 cogs the top comes out then the whole lot will come off when the 2 cables are seperated and the 3x 14mm bolts are removed.
let me know if you can sort me jon and see you at the countess on the 28th.
cheers Gav,

[jotto]

I will try to get it off tomorrow

[Vagrant No2]

I will try to get it off tomorrow

oooh eerrr missus

[tonka1]

thanks jon, been a bit cheeky and borrowed the bit off Dan's truck to make sure it was that and all works fine now so will have to put it back once i get the one from you.
Cheers Gav