Announcement

**stormforce** · 2 November 2005, 13:42

Originally posted by NewbiePleb

Greetings,

I have recently bought a 2LT Mk3 and have a problem as well as a few questions.

Fault - 4WD does not engage. If I'm stationery and push the button nothing happens. The 4WD light on the dash doesn't come on. If I'm moving and push the button the dash light flashes and a beeping alarm sounds. I have swapped the 4WD control unit with one that I know works but this makes no difference. Has anyone got any ideas?

Also does anyone know of a good garage (near to Swindon) who know surf's and service them? Lastly, where's the best place to get an alarm fitted....answers on a postcard

Thanks in advance,

Ken

hi ken do a search for the 4wd and you will get all the info you need.have you tried moving backwards and forwards slightly when you engage 4wd

try Tonyn on here he is probably the best and closest to you and dont charge the earth

**DaveD** · 2 November 2005, 14:35

I half remember a post similar to this and think the flashing 4wd light points towards the problem a bit like the error codes. TonyN is yer man to get in touch with
http://www.4x4toys.co.uk/homepage.html

**NewbiePleb** · 2 November 2005, 17:20

Originally posted by stormforce1067

hi ken do a search for the 4wd and you will get all the info you need.have you tried moving backwards and forwards slightly when you engage 4wd

try Tonyn on here he is probably the best and closest to you and dont charge the earth

Thanks Richard...searched the forum and as you said loads of tips/hints.

Announcement

Newbie Needs Help

Newbie Needs Help

Comment

Comment

Comment