Disel Pulp

[basic_meo]

Hey guys, I am having problem with leakage of my disel... do any body have a clue what it could be.. this happen when the enging is cold when it is running it seem to be ok
I was told my pulp need to be repaire and it will cost me 450 to 600 Euro... I found it very expensive can any body help me if to get a second or is there any other option??

[Guest]

I would reckon that it is probably the top seal on the fuel pump if that is the area that it is leaking from. The seal can be replaced - if you do a search for Diesel pump leak or something like that I am sure you will find something about it here, pretty sure there a quite a few posts about it. The seal will cost virtually nothing compared to the price of a new pump.

Cheers

[basic_meo]

Hey guys, I am having problem with leakage of my disel... do any body have a clue what it could be.. this happen when the enging is cold when it is running it seem to be ok
I was told my pulp need to be repaire and it will cost me 450 to 600 Euro... I found it very expensive can any body help me if to get a second or is there any other option??

Thanks Andy, they try to replace the seal but it still continue leaking I don't know what to think

[Guest]

Thanks Andy, they try to replace the seal but it still continue leaking I don't know what to think

Maybe the pump body is slightly out of true - some silicone sealant should do the trick. Can't really think of anywhere else for it to leak diesel apart from the fuel shutoff valve or around the injector pipes.

Cheers

[NiftyNev]

You need to determine exactly where it is leaking.If still the top seal then maybe it was not done right.It could also be leaking between pump body and the section on back that has all the conections for fuel lines.This I believe is a job requiring removal and pump rebuild.

Neville

[basic_meo]

You need to determine exactly where it is leaking.If still the top seal then maybe it was not done right.It could also be leaking between pump body and the section on back that has all the conections for fuel lines.This I believe is a job requiring removal and pump rebuild.

Neville

Thank it look like that but does it woth rebuilding it for 450 t0 600 euro?... how much does it cost if I have to by one do any body know the parts no. it is BOSCH type for LN130 surf 2.4 SSR 1990