Originally posted by icsys
Announcement
Collapse
No announcement yet.
Aerial
Collapse
X
-
Me too, bent it and now it goes up fully but only down to 6" and stops (and wondrously the local chavs haven't removed it yet!). Had been thinking about the options of replacing it and wondered if there's any alternatives of a slightly more forgiving nature? i.e. something more like the CB whip (as I believe they're called?). Ideally if ones exist that can be easily taken on/off even better (see chav comment...).
Geoff.
Comment
-
Originally posted by CmarIf your aerial is bent, and I'm assuming it's electric, You can unscrew the nut that holds in the aerial, then get someone to switch on the radio. The aerial will rise and then come completely out of the housing. Just be sure to catch it before it falls and scratches the paint. Check which way the teeth face on the belt before removing completely. Then all you need is the replacement mast.
With the radio on, insert the toothed belt (remembering to face them the correct way) until you can't push it any further and then get someone to switch off the radio. Guide the new mast down into the housing until its in completely. Put the nut back on top, tighten.
Job done!It's only a hobby!
Comment
Comment