Desperate Exhaust mission.

[TonyN]

Can someone with a stock exhaust do me a favour and measure the size of the following parts.

1/ main silencer, width and lenght.
2/ pipe size into and out of the silencer
3/ length of whole center section, from cat (not the deisel guys, is it straight to the manifold join?) to next join over rear axle.
4/ do you have a resonator (small silencer by tailpipe)

Need measurement from a 2.4 and 3.0 oil burner and a V6 gas guzzler.

I've got our 2.4's but it dosn't look stock, and the bullet's has been abused by me, so need fresh measurements and Shelleys 4Runner is to far away now!

Ta

[Gamedawn]

Sorry I took so long - had to find the exhaust under the mud

1/ 22.5" long x 8" dia
2/ 2" dia in and out
3/ Centre section has flex pipe and is 26" long. There is no join behind the main box
4/ yep

pics attached

[TonyN]

Thanks Roger!

really need one of the V6 guys to do this as well.........

[rich]

Tony,

You can come over and measure the exhaust on my 3.0 if you want, if it wasn't going to !!!! it down tomorrow I would be more generous!

Plus I haven't got much of a clue how to measure it

Rich.