Foobard Diff

[Cant Get Right]

I think I have a problem with my Diff, I'm pretty sure its not meant to look like this. anyone happen to have one lying around?

[Growler]

What ratio are you looking for ?

[dannyboy77]

i had that happen at lot to me! i though it was the right foot while off roading but when i did the solid axle swap i found out that the chassis number said 4.88 diff so i was replacing the front with 4.88's but actually someone previously thought an axle is an axle and swapped it not knowing it was a 4.56 ratio so i had 4.56 on the rear adn 4.88 on the front no wonder i was breaking the diffs all the time when off roading! check your rear to find out what ratio it is then match the front dont just go off the chassis number!

but also go easy on the right foot off roading!

[Cant Get Right]

All I know is there is 41 teeth on the Crown Wheel and 10 on the Pinion Gear. That any good?

Sorry edited this, WAS 41 teeth haha

[Growler]

Code on VIN plate would be useful

[Cant Get Right]

i had that happen at lot to me! i though it was the right foot while off roading but when i did the solid axle swap i found out that the chassis number said 4.88 diff so i was replacing the front with 4.88's but actually someone previously thought an axle is an axle and swapped it not knowing it was a 4.56 ratio so i had 4.56 on the rear adn 4.88 on the front no wonder i was breaking the diffs all the time when off roading! check your rear to find out what ratio it is then match the front dont just go off the chassis number!

but also go easy on the right foot off roading!

Genuinely think it was my right foot that was the problem, I made it, others didnt hee hee I have a very distinct off roading technique

[Cant Get Right]

code on vin plate would be useful

knz130-9012117

[Cant Get Right]

Code on VIN plate would be useful

Or am I being stupid here and Im actaully gonna have to look at the VIN plate istead of my documents for a code

[Cant Get Right]

After looking at vin plate its a A343F G294

[Growler]

That makes it an 8" 4.1 4 Pinion open diff, of which I don't have one but hopefully someone will be along soon that does