I thought I would change these bushes as the rattling was getting quite irritating with the windows down this summer. With am MOT due and a split front drive shaft gaiter it was a good time to do them. I read up on here and numerous links as to how to tackle the job and got stuck in. An error I made was upon reassembly of the drive shaft back into the hub. The outer circlip groove was not protruding enough to fit the washer and clip. I suspected I had not fitted the bronze bushes properly which was preventing the shaft to reach its correct position. I removed the shaft and tried squeezing them together with a stud and washers to no avail. So I took the hub off again and inspected it with the shaft off the car. It was too much grease!!![Clown](https://hiluxsurf.co.uk/core/images/smilies/clown.gif)
So it went back on and lined up this time. So Thanks for all the info, I have a non rattling surf now.![Happy](https://hiluxsurf.co.uk/core/images/smilies/happy.gif)
Dave
![Clown](https://hiluxsurf.co.uk/core/images/smilies/clown.gif)
So it went back on and lined up this time. So Thanks for all the info, I have a non rattling surf now.
![Happy](https://hiluxsurf.co.uk/core/images/smilies/happy.gif)
Dave