yobit eobot.com

Announcement

Collapse
No announcement yet.

assuming it's the bronze bushes??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • assuming it's the bronze bushes??

    ###### things! Get a clicky rattle sometimes followed by a loud errrrrrrrrrrrr!!!!

    Outer cv joints move up and down, side to side.

    It's this the bronze bushes causing it?
    well, that was a bad idea!

  • #2
    Yup.
    Not a difficult job to replace, just pop the new ones in the freezer overnight and remove just before fitting, makes it a lot easier to get them in.

    Comment


    • #3
      Cool, so do they simply get worn by the drive shafts rotating inside them therefore increasing their internal diameter making more of a gap?
      well, that was a bad idea!

      Comment


      • #4
        Originally posted by muddle View Post
        Cool, so do they simply get worn by the drive shafts rotating inside them therefore increasing their internal diameter making more of a gap?
        Yup.

        Comment


        • #5
          Awesome! Best try source some. Assuming they're soft is it best to remove hub and use a press or will a hammer and socket be sufficient without damaging them?
          well, that was a bad idea!

          Comment


          • #6
            Roughtrax sell them, inner and outer bushes. Big spendy though.

            I just tapped them in with a large socket, easy when they're frozen.

            Comment


            • #7
              Wow!!!! Why is the small outer one double the price of the large inner!!! I need both sides so going to cost over £100
              well, that was a bad idea!

              Comment


              • #8
                I used genuine on mine years ago cured it right away with plenty of grease in them to
                3.0 TD SSR-X LTD 1994 Black, sold and passed MOT

                Comment

                Working...
                X