anyone here make bash plates?

[muddle]

im in need of a new one,

the one on mine is for the underslung air con condensor which i have now removed, so wanting one like the 3.0 ones have as its a bit narrower and better for shackles as mine are interfearing with the guard. even tho i have gas axed half of it away, but its a bit corroded and gash so wanting a new better one.

dont have time to make one so does anyone here make one, would like a straight bolt on fit and nice and thick and strong if poss.

if anyone does please let me know a price

thanks

[MWS]

Hey, Luke. this one comes courtesy of the Aussie Surf site. It fits a 2.4, but not 3.0 auto. You may find someone local to fab one for you. Hope it helps.

[muddle]

something like that yea, i need it for fitment to a 2.4.

plus i dont want it as low as the one that is on there, the standard one is way too low without the condensor behind it and gets in the way.

[wishbone]

Why not just get a used 3.0 one (plus the fitting brackets) ?

[muddle]

prefer a solid one with no vents.

[BioHazard]

That's easy ... my old 2nd gen just had a sheet of 4mm ally with 4 holes

[muddle]

thats the sort of thing im after bud, did you make it, cause i want nice bends in it and have nothing but a vice to do it with, might just have a go at it, where can i buy sheet ali from or steel?

[Growler]

thats the sort of thing im after bud, did you make it, cause i want nice bends in it and have nothing but a vice to do it with, might just have a go at it, where can i buy sheet ali from or steel?

Try This

[muddle]

sexellent

[KERRSURF]

Hey, Luke. this one comes courtesy of the Aussie Surf site. It fits a 2.4, but not 3.0 auto. You may find someone local to fab one for you. Hope it helps.

Yer mixed up mate, that is for the 3.0, I know, I made one from 6mm ally plate.

[MWS]

Yer mixed up mate, that is for the 3.0, I know, I made one from 6mm ally plate.

Alan, I had one made and it won't fit the 3.0 auto, because the radiator sits too low on a standard Surf that hasn't had a body lift. Maybe yours was body lifted before you did your bash plate? See pics.

[BUSHWHACKER]

Alan, I had one made and it won't fit the 3.0 auto, because the radiator sits too low on a standard Surf that hasn't had a body lift. Maybe yours was body lifted before you did your bash plate? See pics.

Heard of this Mick?

[Webbo]

Alan, I had one made and it won't fit the 3.0 auto, because the radiator sits too low on a standard Surf that hasn't had a body lift. Maybe yours was body lifted before you did your bash plate? See pics.

O dear, Rads on its way out.....

[muddle]

im sure your mounting points are different to mine, is that a 3.0? the 2 rear blots go vertical into the cross member and the front ones are horizontal just below the front bumper.

plus my rad isnt that low...

[POPEYE]

heard of this mick?

i have!:-d