ATF Cooler

[murph]

My thanks to Tony N for fitting me cooler. Nice one mate. Thanks for the tea, doughnuts & chat mate. Checked oil levels, everything seems to be A ok. What I did notice, is that I'd be able to keep a choc bar in the middle console without it melting.
All I got to do now, is think where am I going to put the sticker

[TonyN]

It's all about the Chocolate.

[bullet513]

could you post some pics up please? also what cooler did you use?

[si tate]

could you post some pics up please? also what cooler did you use?

I need to do mine but not 100% sure on cooler,fittings, pipe & mounting.

TONY; do you do a kit type thing that one could purchase from you with a step by step guide?

[frontman]

I would be interested in what you use Tony.

[Apache]

You don't need the cooler, its the sticker that does all the work.

[si tate]

You don't need the cooler, its the sticker that does all the work.

Ahhh I see, so do I just pop the sticker in front of the rad.

[TonyN]

I need to do mine but not 100% sure on cooler,fittings, pipe & mounting.

TONY; do you do a kit type thing that one could purchase from you with a step by step guide?

If its an auxi cooler to going inline with the in rad cooler I get a small cooler on ebay, they are normally advertised as MG oil coolers, but you'll need to scource seperate fittings to suit usually and connections vary.

For stand alone cooling I get the B&M Super Cooler kits, 70264 or 70265, depends what I can get at the time.

They come with lots of bracket making options, and hose. You often need more hose, but are pretty well equiped, and work well on 2nd and 3rd Gen diesels with to much buggering around.

They are pretty easy to find, I get them as I need them, but can get them for people if needed.

I have posted pics in the past, should be searchable.

[murph]

could you post some pics up please? also what cooler did you use?

Sorry mate,

didn't take any pics at the time of fitting.

However, this is what the unit came out of.

[Overland Tonka]

Never mind all the chat about ATF stuff......











Tea and ###### donuts!!..........###### teachers pet! Next time I'm down I will expect caviar and champagne...

[si tate]

If its an auxi cooler to going inline with the in rad cooler I get a small cooler on ebay, they are normally advertised as MG oil coolers, but you'll need to scource seperate fittings to suit usually and connections vary.

For stand alone cooling I get the B&M Super Cooler kits, 70264 or 70265, depends what I can get at the time.

They come with lots of bracket making options, and hose. You often need more hose, but are pretty well equiped, and work well on 2nd and 3rd Gen diesels with to much buggering around.

They are pretty easy to find, I get them as I need them, but can get them for people if needed.

I have posted pics in the past, should be searchable.

Thanks mate, I'll look into getting the bits together then pester you when I get stuck.