Oil pressure sender unit

[blackpoolsparks]

Where does one usually fit an oil pressure sender unit.
Not on a Smurf particularly, just in general

[BUSHWHACKER]

On the filter housing or fit a sandwich plate.

[blackpoolsparks]

On the filter housing or fit a sandwich plate.

Is there an existing threaded hole on the housing usually ?

[BUSHWHACKER]

Is there an existing threaded hole on the housing usually ?

Depends on the vehicle, but you could remove the oil light sender and fit a pressure sender in it's place.( with it's own wire to the gauge obviously.)

[blackpoolsparks]

Depends on the vehicle, but you could remove the oil light sender and fit a pressure sender in it's place.( with it's own wire to the gauge obviously.)

Yea, that's a good idea.
Thanks for the info.
And
While I have your attention
Do you know what the wheel offset is on a 3rd gen?

[BUSHWHACKER]

Yea, that's a good idea.
Thanks for the info.
And
While I have your attention
Do you know what the wheel offset is on a 3rd gen?

No, but a 2nd gen is minus 8 if that helps. (wheel hub towards the outside of the wheel)

My wheels on the 3rd gen are zero offset. (wheel hub in centre of wheel)

[blackpoolsparks]

Cheers mate

[si tate]

Hey gor, I can see your surf looking like this soon.

http://image.automotive.com/f/v_feat...ior_gauges.jpg

[blackpoolsparks]

Hey gor, I can see your surf looking like this soon.

http://image.automotive.com/f/v_feat...ior_gauges.jpg

Yea, baby

[garry]

Depends on the vehicle, but you could remove the oil light sender and fit a pressure sender in it's place.( with it's own wire to the gauge obviously.)

If you use a t piece you could have both sender and light
bare in mind though they are usually tapered threads

[BUSHWHACKER]

If you use a t piece you could have both sender and light
bare in mind though they are usually tapered threads

Yep, 1/8 NPT. Toyota use 10mm most of the time though.

[blackpoolsparks]

Yep, 1/8 NPT. Toyota use 10mm most of the time though.

I should imagine Suzuki do too, ????