So sorry Vince!!!

[hiroler]

look what happened!!

anyhow what is the best way to get it clean? is it still ok to just jet wash it as normal or will this kill it??

[BUSHWHACKER]

Hehehe!!

It's OK to jet wash it but have the engine running when you do and try not to blast the coil packs or AFM.

So does the 4WD work OK then? I never got a chance to test it because incredibly, it was dry here!!!!!

[hiroler]

Yeah it all works fine, the only prob I had was the bottom rad hose is to big for the outlet and it keeps coming off I need to get a smaller diameter hose but that was my fault as I took the existing pipework in to get a silicone hose made up instead of measuring the outlets!!!!

[BUSHWHACKER]

Yeah it all works fine, the only prob I had was the bottom rad hose is to big for the outlet and it keeps coming off I need to get a smaller diameter hose but that was my fault as I took the existing pipework in to get a silicone hose made up instead of measuring the outlets!!!!

The oulet on the bottom of the rad is 32mm.

If the hose is a loose fit, get some hose repair tape for repairing split hoses, it comes in a box/pack of two rolls, one is a sticky cloth type tape and the other is that self amalgamating tape.
I just tightly wind on a couple of layers of the sticky cloth tape to build up the diameter on the rad outlet so that the new hose has something to grip onto.

[POPEYE]

Disgracefull!!! give him an asbo, or better still take his engine back (and give it to me