If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyone got a lenght or two hanging about? about 5ft long ish, since my timber jacking arrangements collapsed i need summat a bit more manly,
and "cheaps" the password!
we once sent a trainee out for a pack of skyhooks
he came back with em too the guy at the shop sold him sheeting hooks for roofs
so we sent him back for tartan paint
We are terrible to our apprentices,here is a wee list of some of the stuff we get them to go for. Leg of salmon,skirting board ladder,bucket of steam,long stand,strawberry lilets(tampons),various left handed tools,hammers/saws etc
We had just finished lunch one day and sent the apprentice down the shop with a fiver to get 5 singles for the parking meter,half an hour later he came back with a bag.I asked where he was to which he replied you owe me 2.50 as he had to put his own money towards the 5 singles of chips!!He didnt make it as a chippy needless to say
ian ive got a nice bit of "c" section here,about 200mm wide and 8mm thick i can cut it to the length you want just give me a size and come over and collect it from work mate.
ian ive got a nice bit of "c" section here,about 200mm wide and 8mm thick i can cut it to the length you want just give me a size and come over and collect it from work mate.
Ok Mark i'll have a proper measure up and let you know, will PM you for cost address etc, cheers mate
Hiya Popeye,
i got some RSJ if you want it, stormy is coming up to me soon and he can collect it for you, I am sure we can find a way of getting it to you and it is about 5' long FOC seeing as its you
Hiya Popeye,
i got some RSJ if you want it, stormy is coming up to me soon and he can collect it for you, I am sure we can find a way of getting it to you and it is about 5' long FOC seeing as its you
Hi Andy, how you doing mate, that would be great, that would give me two of em for the occaisions i need to jack up both ends, let me know when and where mate and i can meet up with rich on his way through,
cheers, ian
And thanks Mark, i'll find it, just had a measure and 4ft will do nicely, i'm going to weld some plate and angle on the ends to stop it slipping, much better than the two bits of 6x2 i was useing, poor old Lee prob $hit a brick when it went, i was down the pit but he was laying along side his truck
Comment