I'm just going to

[Phantom]

Change a drive shaft, both brake discs,a set of shox, 2 upper and 2 lower ball joints, 2 roll bar drop links and some poly bushes. So I'll see you tonight with skinless knuckles

[POPEYE]

Weather permitting? rather you than me

[Bogus]

I think you should wait for Bio to come on. Im sure, with his new found skills and knowledge, that he will be able to prepare a risk assesment for you, advise you on PPE, possibly some manual handling training, and a COSHH appraisal for the brake work. That way you may complete the job safely and avoid the skinned knuckles.

Bogus

[Brummie]

Nooooooo dont let "elf n safety" get involved You'll still get skinned knuckles be totaly frustrated and the job wont even get half done.

[Phantom]

I think you should wait for Bio to come on. Im sure, with his new found skills and knowledge, that he will be able to prepare a risk assesment for you, advise you on PPE, possibly some manual handling training, and a COSHH appraisal for the brake work. That way you may complete the job safely and avoid the skinned knuckles.

Bogus

Coffee break thats one side done, Oh fitting free wheeling hubs as well.

[Phantom]

Ahh all finished Cam belt,idler pulley,tensioner, alternator belts,air con belt, both drive shafts,free wheeling hubs,discs and all four ball joints just the drop links and polly bushes when the roll bar arrives.

[surfenstein]

what took you so long steve...........

[BioHazard]

what took you so long steve...........

just cos i have hidden your tardis in my garage

[Phantom]

what took you so long steve...........

I did it with a leatherman in the rain and it still took me 5 hours.

[stormforce]

Steve how soon do you want this arb.i can get it sorted this week for you sometime

[Phantom]

Steve how soon do you want this arb.i can get it sorted this week for you sometime

Excellent do you have one then?

[stormforce]

yea i got one here for the 3.0l

[cabbage]

nice! think you could do my drive shafts as well!!

do the surfs gain much from free wheeling hubs? i've a set on one of my lawn rovers, they only save a fraction of a midge's baw hair on fuel but does make the handling feel ever so much lighter (as light as a tractor engined, none power assisted steering shed with wheels can be)

[slobodan]

I did it with a leatherman in the rain and it still took me 5 hours.

WD it before you snap it back in it's pouch.

[Phantom]

yea i got one here for the 3.0l

PM sent Rich

nice! think you could do my drive shafts as well!!

do the surfs gain much from free wheeling hubs? i've a set on one of my lawn rovers, they only save a fraction of a midge's baw hair on fuel but does make the handling feel ever so much lighter (as light as a tractor engined, none power assisted steering shed with wheels can be)

No I can't do yours you live 400 miles away.
Don't really know what I'll gain if anything. I did it because I had a set lying around and my torsion bars are wound up so it eats cv boots. Also I do a lot of towing with it.