ball joint spacers and diff drop kit

[BioHazard]

So i had bad wind ......the dog got blamed first

[surfenstein]

Can't be as bad as actually watching it being done, what with Woodzie farting while lying under graham's (old) truck, Mark firing sparks everywhere with the grinder and me trying to play fetch with Mark's dog amongst them all in the confines of a garage with a rough concrete floor and trailing air lines and electric cables.

pmsl.that was a good day......ok guys point constructively taken i will work out pricing and split the kits open to options.as for the 3rd gen im waiting to get one in to see what parts we can produce and offer .

[dieselboy]

Hi Mark,
Been doing some searching and found this (so sorry to revive an old thread)

I'm after some BJ spacers, diff drop spacers (although I have already asked TonyN for these but not sure if we agreed).
Do you have any of these available?

Also, do you make up the body lift kit?

Thanks!
Tony

[surfenstein]

hi tony.yes we do both the ball joint spacers and body lift spacers,in fact we do or can do just about anything.but.......make sure tonyn is not fabbing you up a kit first.or has ordered you the spacers from the states.

[dieselboy]

hi tony.yes we do both the ball joint spacers and body lift spacers,in fact we do or can do just about anything.but.......make sure tonyn is not fabbing you up a kit first.or has ordered you the spacers from the states.

Thanks Mark,
TonyN is fabbing the diff spacers. Can I buy the body lift and ball joint spacers from you?

Do you also cut flanges? I'm thinking about fitting an intercooler and I would need a stainless flange that would bolt onto the inlet manifold in place of the last turbo pipe although I haven't drawn anything up yet so wouldn't need this for a while.

Cheers!
Tony

[surfenstein]

hi tony,yes mate no probs,and yep can fab you up a bracket no probs.give us a call,on 01202 891958.

[dieselboy]

Hi Mark, are you watching this thread? I read on another post you do the adjustable torsion bars?
Do you still do these? What's the lead time and cost to deliver to London? And would this allow me to adjust to standard Toyota length as well?

Cheers!

[surfenstein]

Hi Mark, are you watching this thread? I read on another post you do the adjustable torsion bars?
Do you still do these? What's the lead time and cost to deliver to London? And would this allow me to adjust to standard Toyota length as well?

Cheers!

hi tony,adjustable torsion bars? do you mean adjustable panhard rod? we use to do them,but due to lack of interest we dont do them anymore.your best bet is to have a word with our tonyN and get him to cut and weld an extra inch or two,to your existing panhard rod.

[dieselboy]

hi tony,adjustable torsion bars? do you mean adjustable panhard rod? we use to do them,but due to lack of interest we dont do them anymore.your best bet is to have a word with our tonyN and get him to cut and weld an extra inch or two,to your existing panhard rod.

You're right Mark, was half asleep when I wrote that. Okay I can get my local place to cut and fab when they make my exhaust up soon. Thought it would be easier / nicer with an adjustable panhard rod. If I ever wanted to put back to stock height (Cant see why I'd want to though) it would be more hasle.
Cheers!

[chewee]

Mark are you still doing the bj spacers and if you are how much for 2" ? Where abouts in Dorset are you? As I'm only in Poole! Thanks bud

Dan

[woodwarm]

Mark are you still doing the bj spacers and if you are how much for 2" ? Where abouts in Dorset are you? As I'm only in Poole! Thanks bud

Dan

He was 4yrs ago

Have a look at his profile page

Edit......

Try the phone no in previous post

[shokenore]

He was 4yrs ago

Have a look at his profile page

Edit......

Try the phone no in previous post

You would be better trying to reach him on the other side.
Hpoc.co.uk