balljoint spacers

[wishbone]

So for 2" spacers you're supplying 5 x 10mm steel 'slices' per side ?

Rob.

[surfenstein]

So for 2" spacers you're supplying 5 x 10mm steel 'slices' per side ?

Rob.

yep. but its the design. you wont need to cut the lip off of the underside of the wishbone and you can add or subtract the plates as you want and being laminated they will be stronger.so you can go from 10mm to 100mm if you want.

[Apache]

Interesting way of doing it...

100mm balljoint spacers though?! Thats ferkin long bolts to deal with unusual stresses (wheel pushed sideways at top or bottom)

[POPEYE]

I'm no expert but i would'nt fancy going any more than 2" spacers, wtf do i know tho

And! how are the wheel alignment place gonna adjust the lower wishbone to that extent?

[stormforce]

i was originally looking at having 3" b/joint spacers and after having a chat with TonyN he advised the max should be 2" as problems will occur

[surfenstein]

Interesting way of doing it...

100mm balljoint spacers though?! Thats ferkin long bolts to deal with unusual stresses (wheel pushed sideways at top or bottom)

i wouldnt advise going that long,i just put that up as an option.

[surfenstein]

ok just a quick update,in the next two weeks we should take delivery of 250 10mm ball joint plates,that will equate to 25 sets of 50mm balljoint spacers.we have had a test spacer made and we are really pleased with the results.these are off to the platers next week and will be gold zinc plated to help keep them from rusting.so taking orders now.

[surfenstein]

Bump.:d:

[blackpoolsparks]

are 2nd gen and 3rd gen BJs the same?

[BUSHWHACKER]

are 2nd gen and 3rd gen BJs the same?

No.