Would it fit ?

[evildwarf]

would a tjm bumper for a shogun fit a 2nd gen surf without to much hassle
TIA

[BUSHWHACKER]

No, not without a lot of cutting and welding to the mounting brackets.

[BioHazard]

If you can alter it ....if it's a steel one it will be easier to weld a alloy one will be harder to modify


you can make a landy one fit if you have the equipment and ability to do it



but a mittsi one will not fit on as it is

[evildwarf]

thanks very much bushwacker appreciated for your time

[BioHazard]

thanks very much bushwacker appreciated for your time

Get a tirfor .....then you can use it from any angle

[evildwarf]

If you can alter it ....if it's a steel one it will be easier to weld a alloy one will be harder to modify


you can make a landy one fit if you have the equipment and ability to do it



but a mittsi one will not fit on as it is

which landy 1 ian theres so many and they all break down it must be the only good bit on them

[evildwarf]

Get a tirfor .....then you can use it from any angle

tirfor ? na to lazy thats why i got an auto

[slobodan]

tirfor ?

It's a ratchet winchy thing

[BioHazard]

http://cgi.ebay.co.uk/TIRFOR-TU16_W0...d=p3286.c0.m14

[evildwarf]

Sorry ian but which landy bumper will go on the surf PPPPPPPPPPwease

[BioHazard]

Sorry ian but which landy bumper will go on the surf PPPPPPPPPPwease

You will still need to alter the fixing points so a angle grinder and welder is needed ........ if you are able to do so one of the tubular ones will fit as supersurf has done it

[evildwarf]

do you know which model disco 90 110 range ?